iRobot Roomba 675Roomba Error 7Roomba Error 7 — cause and how to fix it
Error code: Roomba Error 7
Error 7 on the Roomba 675 usually means the main brush is not spinning correctly.
How to fix Roomba 675 Roomba Error 7
- 1
This is often caused by hair and debris getting tangled around the brush bearings or the brush motor itself.
- 2
To fix this, flip the robot over, remove the brush guard and the main brush assembly.
- 3
Thoroughly clean any tangled debris from the brush and the ends where it connects.
- 4
If the problem persists, the brush motor may need replacement, typically costing $15-25 aftermarket.
What this repair uses
Roomba 600 series main brush module
Take it out, clean it, and seat it again before you replace it. If the error stays, this is the part to change.
Frequently asked questions
What does iRobot Roomba 675 Roomba Error 7 mean?
Error 7 on the Roomba 675 usually means the main brush is not spinning correctly.
Is this a hard repair to do myself?
Most of the steps above take 20-40 minutes with basic tools like a screwdriver. If you'd rather not open the unit yourself, contact the official support line below instead.
What part do I need?
You'll need a Roomba 600 series main brush module. Compatible aftermarket parts are widely available on AliExpress and typically cost $8-60 depending on the part.
How do I contact iRobot support?
Register your Roomba on the iRobot app before contacting support — this speeds up warranty claims significantly. Phone: 1-800-727-9077
Official support
Register your Roomba on the iRobot app before contacting support — this speeds up warranty claims significantly.
Online support
Open support page →